November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A NEW, RE- MADE FULL LOWER CAB DIVIDING WALL PANEL TO SUIT HK HT & HG UTES & VAN.
PLEASE NOTE THAT THE PRESSINGS ARE THERE TO PREVENT "DRUMMING" & SLIGHTLY DIFFER FROM THE ORIGINAL
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
September 6, 2019 7:15 pm
Published by dean
THIS ITEM IS A NEW, RE- MADE FULL SIZED PARCEL SHELF PANEL, TO SUIT HK HT & HG SERIES MONARO COUPE & PREMIER / KINGSWOOD SEDAN MODELS. THIS PANEL INCLUDES UNDER THE REAR WINDOW CHANNEL AS ORIGINAL.
PLEASE NOTE THAT THE PRESSINGS ARE THERE TO PREVENT "DRUMMING" . THESE MAY DIFFER SLIGHTLY FROM AN ORIGINAL PART. ALTHOUGH DESIGNED TO APPEAR AS CLOSE TO FACTORY AS POSSIBLE ONCE INSTALLED.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA COURIER.
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A NEW, RE- MADE PARCELSHELF PANEL TO SUIT HK HT & HG SERIES UTE. THIS PANEL INCLUDES UNDER THE REAR WINDOW CHANNEL AS ORIGINAL.
PLEASE NOTE THAT THE PRESSINGS ARE THERE TO PREVENT "DRUMMING" & SLIGHTLY DIFFER FROM THE ORIGINAL PART.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA COURIER.
November 5, 2019 10:16 am
Published by dean
THIS ITEM IS A NEW REAR SECTION OF THE PARCEL SHELF PANEL, TO SUIT HK HT & HG SERIES MONARO COUPE & PREMIER / KINGSWOOD SEDAN MODELS. THIS PANEL WOULD BE SUITABLE IF YOU DON’T NEED A FULL PARCEL SHELF PANEL, AND WOULD JOIN TO YOUR EXISTING PARCEL SHELF FRONT SECTION.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA COURIER.
February 28, 2020 7:29 pm
Published by dean
THIS ITEM IS A NEW REAR SECTION OF THE PARCEL SHELF PANEL, TO SUIT HK HT & HG SERIES MONARO COUPE & PREMIER / KINGSWOOD SEDAN MODELS. THIS PANEL IS LOCATED DIRECTLY UNDER THE BOOT FILLER PANEL / REAR WINDOW AREA. IT WOULD BE SUITABLE IF YOU DON’T NEED A FULL PARCEL SHELF PANEL, AND WOULD JOIN TO YOUR EXISTING PARCEL SHELF FRONT SECTION.
PLEASE NOTE- THIS VERSION DOES NOT INCLUDE THE RECESSES FOR THE BOOT HINGE MOUNTINGS. The more expensive version does.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA COURIER.
November 20, 2019 10:14 am
Published by dean
DESCRIPTION
THIS ITEM IS A RE- MADE OUTER BEAVER PANEL, TO SUIT ALL HK HT OR HG SERIES HOLDEN WAGONS.
THE WAGON OUTER BEAVER PANEL WAS ORIGINALLY MADE IN ONE SECTION. ALTHOUGH DUE TO SHAPE, I HAVE MADE IN TWO SECTIONS, AVAILABLE SEPARATELY AS LH & RH SIDES. THIS LISTING SUITS LH (passenger side). DUE TO COMPLEX FIT, A PROFICIENT INSTALLATION IS RECOMMENDED.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE).
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
October 4, 2019 9:52 pm
Published by dean
DESCRIPTION
THIS ITEM IS A RE- MADE OUTER SILL PANEL, TO SUIT ALL HK HT OR HG SERIES HOLDEN BODY STYLES, EXCEPT MONARO.
THIS PANEL IS MADE FROM HEAVIER GUAGE 1.2mm STEEL. HAVE THE FACTORY STYLE DRAIN FLUTES. THESE SILLS FOLD APPROXIMATELY 20mm INTO THE DOOR OPENING. SUITS LH (passenger side).
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE).
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:10 am
Published by ntechmedia
DESCRIPTION
THIS ITEM IS A RE- MADE INNER SILL STIFFENER PANEL, TO SUIT HK HT OR HG SERIES HOLDEN UTE & VAN ONLY.
THIS PANEL IS MADE FROM HEAVIER GUAGE 1.2mm ZINC ANNEAL STEEL, TO HELP DURABILITY. ALSO HAVE THE FACTORY STYLE PRESSINGS & FLANGES.
I’VE DESIGNED THESE TO SUIT EITHER SIDE, SO NO NEED FOR R/H OR L/H.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE).
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 20, 2019 10:41 am
Published by dean
DESCRIPTION
THIS ITEM IS A RE- MADE OUTER BEAVER PANEL, TO SUIT ALL HK HT OR HG SERIES HOLDEN WAGONS.
THE WAGON OUTER BEAVER PANEL WAS ORIGINALLY MADE IN ONE SECTION. ALTHOUGH DUE TO SHAPE, I HAVE MADE IN TWO SECTIONS, AVAILABLE SEPARATELY AS LH & RH SIDES. THIS LISTING SUITS RH (driver’s side). DUE TO COMPLEX FIT, A PROFICIENT INSTALLATION IS RECOMMENDED.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE).
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
October 4, 2019 8:53 pm
Published by dean
DESCRIPTION
THIS ITEM IS A RE- MADE OUTER SILL PANEL, TO SUIT ALL HK HT OR HG SERIES HOLDEN BODY STYLES, EXCEPT MONARO.
THIS PANEL IS MADE FROM HEAVIER GUAGE 1.2mm STEEL. HAVE THE FACTORY STYLE DRAIN FLUTES. THESE SILLS FOLD APPROXIMATELY 20mm INTO THE DOOR OPENING. SUITS RH (driver’s side).
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE).
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
September 24, 2020 8:26 pm
Published by dean
THIS ITEM IS A RE- MADE INTERMEDIATE FLOOR PAN INFPANEL TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THIS INFILL PANEL IS MADE TO FIT BETWEEN THE FRONT & REAR FLOOR PANS. THIS PANEL IS TO SUIT THE SHORTFALL IN LENGTH OF CURRENTLY AVAILABLE REAR FLOOR PAN SECTIONS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION, THE PHOTOS SHOW LOCATION.
THIS LISTING IS FOR ONE L/H (PASSENGER SIDE) PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
September 24, 2020 7:07 pm
Published by dean
THIS ITEM IS A RE- MADE INTERMEDIATE FLOOR PAN PANEL TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THIS PANEL IS MADE TO FIT BETWEEN THE FRONT & REAR FLOOR PANS, AND JOIN ON THE FACTORY SEAM AT THE REAR. AN INFILL PANEL IS ALSO AVAILABLE TO SUIT THE SHORTFALL IN LENGTH OF CURRENTLY AVAILABLE REAR FLOOR PAN SECTIONS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION, THE PHOTOS SHOW LOCATION.
THIS LISTING IS FOR ONE L/H (PASSENGER SIDE) PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A RE- MADE FRONT FLOOR PANEL TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THIS PANEL IS MADE TO FIT UP TO, AND JOIN ON THE FACTORY FIREWALL SEAM.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION, THE LAST PHOTOS SHOW LOCATION.
THIS LISTING IS FOR ONE R/H (DRIVER'S SIDE) PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
September 24, 2020 7:13 pm
Published by dean
THIS ITEM IS A RE- MADE INTERMEDIATE FLOOR PAN INFPANEL TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THIS INFILL PANEL IS MADE TO FIT BETWEEN THE FRONT & REAR FLOOR PANS. THIS PANEL IS TO SUIT THE SHORTFALL IN LENGTH OF CURRENTLY AVAILABLE REAR FLOOR PAN SECTIONS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION, THE PHOTOS SHOW LOCATION.
THIS LISTING IS FOR ONE R/H (DRIVER'S SIDE) PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
September 24, 2020 1:54 pm
Published by dean
THIS ITEM IS A RE- MADE INTERMEDIATE FLOOR PAN PANEL TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THIS PANEL IS MADE TO FIT BETWEEN THE FRONT & REAR FLOOR PANS, AND JOIN ON THE FACTORY SEAM AT THE REAR. AN INFILL PANEL IS ALSO AVAILABLE TO SUIT THE SHORTFALL IN LENGTH OF CURRENTLY AVAILABLE REAR FLOOR PAN SECTIONS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION, THE PHOTOS SHOW LOCATION.
THIS LISTING IS FOR ONE R/H (DRIVER'S SIDE) PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:11 am
Published by ntechmedia
DESCRIPTION
THIS ITEM IS A RE- MADE REAR WINDOW INNER LOWER FILLER PANEL TO SUIT HK HT OR HG SERIES HOLDEN MONARO & GTS COUPE ONLY.
THIS PANEL IS MADE TO FIT UP TO, AND JOIN ON FACTORY SEAMS. IT GOES FROM THE LOWER EDGE OF REAR WINDOW TO THE PARCEL SHELF.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
