THIS ITEM IS A GUSSET PANEL FOR THE INNER DOGLEG AREA, TO THE REAR OF THE CAR’S INTERIOR. THIS PANEL... View Article
THIS ITEM IS A GUSSET PANEL FOR THE INNER DOGLEG AREA, TO THE REAR OF THE CAR’S INTERIOR. THIS PANEL... View Article
THIS ITEM IS A REPAIR PANEL TO SUIT THE CAB DIVIDING WALL SEAM (UPPER SIDE) OF THE HD & HR SERIES UTES. THIS PART FORMS THE LOWER EDGE OF THE UPPER CAB DIVIDING WALL & REPLACES THE TOP HALF OF THE SEAM THAT COMMONLY RUSTS BETWEEN THE UPPER & LOWER CAB DIVIDE WALL PANELS. THIS PART WAS DESIGNED WITH THE INTENTION OF BEING REPLACED WHEN INSTALLING A NEW LOWER CAB DIVIDING WALL, WHEN A FULL UPPER WALL PANEL IS NOT NEEDED (SEE PICS FOR REFERENCE). THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION). THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING. PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION. THIS LISTING IS FOR ONE PANEL ONLY. PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS. THIS ITEM WOULD BE SENT VIA COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
THIS ITEM IS A REPAIR PANEL TO SUIT THE CAB DIVIDING WALL SEAM (UPPER SIDE) OF THE HK HT & HG SERIES UTES. THIS PART FORMS THE LOWER EDGE OF THE UPPER CAB DIVIDING WALL & REPLACES THE TOP HALF OF THE SEAM THAT COMMONLY RUSTS BETWEEN THE UPPER & LOWER CAB DIVIDE WALL PANELS. THIS PART WAS DESIGNED WITH THE INTENTION OF BEING REPLACED WHEN INSTALLING A NEW LOWER CAB DIVIDING WALL, WHEN A FULL UPPER WALL PANEL IS NOT NEEDED (SEE PICS FOR REFERENCE). THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION). THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING. PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION. THIS LISTING IS FOR ONE PANEL ONLY. PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS. THIS ITEM WOULD BE SENT VIA COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
THIS ITEM IS A REPAIR PANEL TO SUIT THE CAB DIVIDING WALL SEAM AREA OF THE HD & HR SERIES UTES. THIS PART REPLACES THE SEAM THAT COMMONLY RUSTS BETWEEN THE UPPER & LOWER CAB DIVIDE WALL PANELS. THIS PART ALSO INCORPORATES THE SUPPORTING EDGE THAT THE TRAY COMPARTMENT FLOOR SITS ON (AS THE ORIGINAL DOES). THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION). THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING. PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION. THIS LISTING IS FOR ONE PANEL ONLY. PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS. THIS ITEM WOULD BE SENT VIA COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
THIS ITEM IS A REPAIR PANEL TO SUIT THE CAB DIVIDING WALL SEAM AREA OF THE HK HT & HG SERIES UTES. THIS PART REPLACES THE SEAM THAT COMMONLY RUSTS BETWEEN THE UPPER & LOWER CAB DIVIDE WALL PANELS. THIS PART ALSO INCORPORATES THE SUPPORTING EDGE THAT THE TRAY COMPARTMENT FLOOR SITS ON (AS THE ORIGINAL DOES). THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION). THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING. PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION. THIS LISTING IS FOR ONE PANEL ONLY. PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS. THIS ITEM WOULD BE SENT VIA COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
NTHIS ITEM IS A RE- MADE FRONT LOWER TIE BAR OUTER PANEL TO SUIT ALL HK HT OR HG SERIES HOLDEN MODELS. THIS PANEL IS MADE TO FIT AND JOIN ON SPOTWELDED SEAMS (SEE LAST PIC.). THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION). THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING. PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION. THIS LISTING IS FOR ONE PANEL ONLY. PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS. THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THIS ITEM IS A FRONT WINDOW OPENING LOWER RUST REPAIR SECTION TO SUIT ALL HD & HR SERIES HOLDENS- INCLUDING, PREMIER, UTE, VAN, WAGON, SEDAN ETC. THIS PANEL IS A FOLDED "L" SHAPED PIECE THAT RUNS ALONG THE BOTTOM AND SLIGHTLY UP THE SIDES OF THE WINDOW OPENING. IT IS ROLLED AND CURVED TO FIT. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS ITEM IS A FRONT WINDOW OPENING LOWER RUST REPAIR SECTION TO SUIT ALL HK HT OR HG SERIES HOLDENS, INCLUDING MONARO, PREMIER, UTE, VAN, WAGON, SEDAN ETC. THIS PANEL IS A FOLDED "L" SHAPED PIECE THAT RUNS ALONG THE BOTTOM AND SLIGHTLY UP THE SIDES OF THE WINDOW OPENING. IT IS ROLLED AND CURVED TO FIT. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS ITEM IS A FRONT WINDSCREEN OPENING, UPPER RUST REPAIR SECTION. THIS PIECE WILL SUIT HK, HT AND HG SERIES HOLDENS WITH THE SQUARE CORNER TOPPED WINDSCREEN (UTE, VAN, WAGON, PREMIER, BROUGHAM & HK SEDAN. THIS PANEL IS A FOLDED "L" SHAPED PIECE THAT RUNS ALONG THE TOP OF THE FRONT WINDOW OPENING. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS ITEM IS A FRONT WINDSCREEN OPENING, UPPER RUST REPAIR SECTION.
THIS PIECE WILL SUIT HQ to WB SERIES HOLDENS, INCLUDING SEDAN, UTE & VAN BODY STYLES (WILL NOT SUIT COUPE) THIS PANEL IS A FOLDED "L" SHAPED PIECE THAT RUNS ALONG THE TOP OF THE FRONT WINDOW OPENING. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS ITEM IS A REAR WINDOW OPENING, UPPER RUST REPAIR SECTION.
THIS PIECE WILL SUIT HQ to WB SERIES HOLDEN STYLE- SIDE UTE, and ONE TONNER CAB BODY STYLES. THIS PANEL IS A FOLDED "L" SHAPED PIECE THAT RUNS ALONG THE TOP OF THE REAR WINDOW OPENING. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS ITEM IS A FRONT WINDSCREEN OPENING, UPPER RUST REPAIR SECTION. THIS PIECE WILL SUIT HK, HT AND HG SERIES HOLDENS WITH THE SQUARE CORNER TOPPED WINDSCREEN (UTE, VAN, WAGON, PREMIER, BROUGHAM & HK SEDAN. THIS PANEL IS A FOLDED "L" SHAPED PIECE THAT RUNS ALONG THE TOP OF THE FRONT WINDOW OPENING. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS ITEM IS A FRONT WINDSCREEN OPENING, UPPER RUST REPAIR SECTION. THIS PIECE WILL SUIT HK, HT AND HG SERIES HOLDENS WITH THE SQUARE CORNER TOPPED WINDSCREEN (UTE, VAN, WAGON, PREMIER, BROUGHAM & HK SEDAN. THIS PANEL IS A FOLDED "L" SHAPED PIECE THAT RUNS ALONG THE TOP OF THE FRONT WINDOW OPENING. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS ITEM IS A FRONT WINDSCREEN OPENING, UPPER RUST REPAIR SECTION. THIS PIECE WILL SUIT HK, HT AND HG SERIES HOLDENS WITH THE SQUARE CORNER TOPPED WINDSCREEN (UTE, VAN, WAGON, PREMIER, BROUGHAM & HK SEDAN. THIS PANEL IS A FOLDED "L" SHAPED PIECE THAT RUNS ALONG THE TOP OF THE FRONT WINDOW OPENING. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS ITEM IS A FRONT WINDSCREEN OPENING, UPPER RUST REPAIR SECTION. THIS PIECE WILL SUIT HK HT AND HG SERIES HOLDEN MONARO COUPE. THIS PANEL IS A FOLDED "L" SHAPED PIECE THAT RUNS ALONG THE TOP OF THE FRONT WINDOW OPENING. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION). THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING. PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION. THIS LISTING IS FOR ONE PANEL ONLY. PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS. THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS