Archives
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A REAR MUFFLER HEAT SHIELD TO SUIT ALL HK HT & HG SERIES HOLDENS, FACTORY FITTED WITH A V8 OR 186S ENGINE.
THIS PART SCREWS UNDER THE BOOT FLOOR AREA, ABOVE THE MUFFLER. AS PICTURED IN LAST PHOTO.
A COMMONLY RUSTED OR MISSING PART NOW.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A RE- MADE REAR WINDOW INNER LOWER FILLER PANEL TO SUIT HK HT OR HG SERIES HOLDEN SEDAN - BELMONT, KINGSWOOD, PREMIER (NOT MONARO COUPE)
THIS PANEL IS MADE TO FIT UP TO, AND JOIN ON FACTORY SEAMS. IT GOES FROM THE LOWER EDGE OF REAR WINDOW TO THE PARCEL SHELF.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
December 22, 2021 11:03 am
Published by dean
THIS ITEM IS A NEW, RE- MADE LOWER FRONT DOOR PILLAR CORNER REPAIR PANEL TO SUIT ALL HD & HR SERIES HOLDENS.
THIS PIECE FITS AT THE BASE OF THE FRONT PLLLAR, AND JOINS ONTO THE SILL PLANEL. A NOW COMMONLY RUSTED AREA ON THESE MODELS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 18, 2020 12:19 pm
Published by dean
THIS ITEM IS A NEW, RE- MADE LOWER FRONT DOOR PILLAR CORNER REPAIR PANEL TO SUIT ALL HK HT & HG HOLDENS.
THIS PIECE FITS AT THE BASE OF THE FRONT PLLLAR, AND JOINS ONTO THE SILL PLANEL. A NOW COMMONLY RUSTED AREA ON THESE MODELS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
July 6, 2023 7:04 pm
Published by dean
THIS ITEM IS A LOWER FRONT DOOR PILLAR REPAIR PANEL TO SUIT ALL HK HT & HG HOLDENS.
THIS PIECE FITS AT THE BASE OF THE FRONT PLLLAR, AND JOINS ONTO THE SILL PLANEL. THE OUTER SUBFRAME LEG BOLT PASSES THROUGH IT. A NOW COMMONLY RUSTED AREA ON THESE MODELS.
THESE ARE FORMED ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE. USING HEAVY GAUGE STEEL, AND DESIGNED WITH INTERNAL GUSSETING FOR EXTRA STRENGTH (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. LH (passenger side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
December 22, 2021 11:11 am
Published by dean
THIS ITEM IS A NEW, RE- MADE LOWER DOOR JAMB CORNER (INNER) REPAIR PANEL TO SUIT ALL HD & HR SERIES HOLDENS.
A NOW COMMONLY RUSTED AREA ON THESE MODELS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A NEW, RE- MADE LOWER DOOR JAMB CORNER (INNER) REPAIR PANEL TO SUIT ALL HK HT & HG, EXCEPT MONARO.
A NOW COMMONLY RUSTED AREA ON THESE MODELS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 18, 2020 12:00 pm
Published by dean
THIS ITEM IS A NEW, RE- MADE LOWER FRONT DOOR PILLAR CORNER REPAIR PANEL TO SUIT ALL HK HT & HG HOLDENS.
THIS PIECE FITS AT THE BASE OF THE FRONT PLLLAR, AND JOINS ONTO THE SILL PLANEL. A NOW COMMONLY RUSTED AREA ON THESE MODELS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
December 22, 2021 11:05 am
Published by dean
THIS ITEM IS A NEW, RE- MADE LOWER FRONT DOOR PILLAR CORNER REPAIR PANEL TO SUIT ALL HD & HR SERIES HOLDENS.
THIS PIECE FITS AT THE BASE OF THE FRONT PLLLAR, AND JOINS ONTO THE SILL PLANEL. A NOW COMMONLY RUSTED AREA ON THESE MODELS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
July 6, 2023 6:46 pm
Published by dean
THIS ITEM IS A LOWER FRONT DOOR PILLAR REPAIR PANEL TO SUIT ALL HK HT & HG HOLDENS.
THIS PIECE FITS AT THE BASE OF THE FRONT PLLLAR, AND JOINS ONTO THE SILL PLANEL. THE OUTER SUBFRAME LEG BOLT PASSES THROUGH IT. A NOW COMMONLY RUSTED AREA ON THESE MODELS.
THESE ARE FORMED ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE. USING HEAVY GAUGE STEEL, AND DESIGNED WITH INTERNAL GUSSETING FOR EXTRA STRENGTH (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
December 22, 2021 11:01 am
Published by dean
THIS ITEM IS A NEW, RE- MADE LOWER DOOR JAMB CORNER REPAIR PANEL TO SUIT HD & HR UTE OR VAN.
A COMMONLY RUSTED AREA ON THESE MODEL.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A NEW, RE- MADE LOWER DOOR JAMB CORNER REPAIR PANEL TO SUIT HK HT & HG UTE OR VAN.
A COMMONLY RUSTED AREA ON THESE MODEL.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RUST REPAIR PANEL SECTION TO SUIT THE FRONT COWL AREA (UNDER BONNET SEAL) ON ALL HK HT & HG SERIES HOLDENS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE SIDE ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
September 18, 2020 10:57 am
Published by dean
THIS ITEM IS A RE- MADE FRONT INNER KICK PANEL REPAIR SECTION TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THIS PANEL IS LOCATED AT THE LOWER AREA OF THE INNER KICK PANEL, WHICH ALSO ATTACHES AND TIES IN THE BOTTOM END OF THE FRONT DOOR PILLAR, AND THE INNER SILL AREA.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. I MAKE THESE FROM 1.2mm ZINC ANNEALED STEEL TO HELP PREVENT RUST.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. FOR LH (Passenger side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
September 18, 2020 7:24 am
Published by dean
THIS ITEM IS A RE- MADE FRONT INNER KICK PANEL REPAIR SECTION TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THIS PANEL IS LOCATED AT THE LOWER AREA OF THE INNER KICK PANEL, WHICH ALSO ATTACHES AND TIES IN THE BOTTOM END OF THE FRONT DOOR PILLAR, AND THE INNER SILL AREA.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. I MAKE THESE FROM 1.2mm ZINC ANNEALED STEEL TO HELP PREVENT RUST.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. FOR RH (Driver side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A RE- MADE FRONT INNER SILL END REPAIR PANEL TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THIS PANEL IS MADE TO FIT ON WHERE THE OUTER SUBFRAME LEG BOLTS AGAINST THE INNER SILL.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. I MAKE THESE FROM 1.2mm ZINC ANNEALED STEEL TO HELP PREVENT RUST.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. FOR RH (Driver side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.