Archives
February 10, 2019 3:32 pm
Published by dean
THIS ITEM IS A NEW RE- MADE INNER REAR WINDOW CORNER PANEL TO SUIT HK HT & HG UTE.
THIS PANEL FITS ON THE INSIDE REAR CORNER OF THE CAB AREA, ABOVE THE PARCEL SHELF.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE INNER WHEEL TUB TO FLOOR BRACE TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. RH (driver's side).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER CAB DIVIDING WALL REPAIR SECTION TO SUIT HK HT OR HG SERIES HOLDEN UTE AND VAN.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. THESE ARE APPROXIMATLEY 100mm HIGH TO COVER MOST RUST AREAS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY, R/H (DRIVER'S) SIDE.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL (ABOVE LINE) REPAIR SECTION TO SUIT HK HT OR HG SERIES HOLDEN UTE & VAN ONLY (SWAGE WIDTH DIFFERS BETWEEN BODY STYLES)
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. THIS PANEL HAS THE CORRECT SHAPED BOTTOM EDGE, NOT INCORRECT GUSSETED & "V" SHAPED ALONG THE BOTTOM EDGE. (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY, R/H (DRIVER) SIDE.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL (ABOVE LINE) REPAIR SECTION TO SUIT HK HT OR HG SERIES HOLDEN WAGON ONLY (SWAGE WIDTH DIFFERS BETWEEN BODY STYLES)
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. THIS PANEL HAS THE CORRECT SHAPED BOTTOM EDGE. (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY, R/H (DRIVER'S) SIDE.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (BELOW LINE R/H SIDE) TO SUIT HK HT OR HG SERIES HOLDEN MONARO & KINGSWOOD SEDAN (SWAGE WIDTH DIFFERS BETWEEN BODY STYLES).
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY, R/H (DRIVER) SIDE.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (BELOW LINE RH SIDE WITH FLAT BOTTOM) TO SUIT HK HT OR HG SERIES HOLDEN KINGSWOOD SEDAN (SWAGE WIDTH DIFFERS BETWEEN BODY STYLES). THIS IS A NON FACTORY PART WITHOUT THE "DIP" FOR PEOPLE DELETING THE SPARE WHEEL WELL, FOR A SMOOTHER LOOK.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LAST PHOTO FOR LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANEL, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS.
November 21, 2018 10:11 am
Published by ntechmedia
DESCRIPTION
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (BELOW LINE RH SIDE WITH FLAT BOTTOM) TO SUIT HK HT OR HG SERIES HOLDEN MONARO & KINGSWOOD SEDAN (SWAGE WIDTH DIFFERS BETWEEN BODY STYLES). THIS IS A NON FACTORY PART WITHOUT THE "DIP" FOR PEOPLE DELETING THE SPARE WHEEL WELL, FOR A SMOOTHER LOOK.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LAST PHOTO FOR LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE ALLOW UP TO 10 WORKING DAYS BEFORE SENDING OFF. EVERY EFFORT IS MADE TO SEND ASAP!!
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS.
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (BELOW LINE R/H SIDE) TO SUIT HK HT OR HG SERIES HOLDEN MONARO & KINGSWOOD SEDAN (SWAGE WIDTH DIFFERS BETWEEN BODY STYLES).
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY, R/H (DRIVER) SIDE.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (BELOW LINE RH SIDE WITH FLAT BOTTOM) TO SUIT HK HT OR HG SERIES HOLDEN PREMIER SEDAN (SWAGE WIDTH DIFFERS BETWEEN BODY STYLES). THIS IS A NON FACTORY PART WITHOUT THE "DIP" FOR PEOPLE DELETING THE SPARE WHEEL WELL, FOR A SMOOTHER LOOK.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LAST PHOTO FOR LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS.
November 21, 2018 10:10 am
Published by ntechmedia
DESCRIPTION
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (BELOW LINE) TO SUIT HK HT OR HG SERIES HOLDEN UTE, VAN ONLY (SWAGE WIDTH DIFFERS BETWEEN BODY STYLES)
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. THIS PANEL HAS THE CORRECT SHAPED BOTTOM EDGE, NOT INCORRECT GUSSETED & "V" SHAPED ALONG THE BOTTOM (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY, R/H (DRIVER'S) SIDE.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (BELOW LINE) TO SUIT HK HT OR HG SERIES HOLDEN WAGON ONLY (SWAGE WIDTH DIFFERS BETWEEN BODY STYLES)
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY, R/H (DRIVER'S) SIDE.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (CORNER SECTION ONLY) TO SUIT HK HT OR HG SERIES HOLDENS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LAST PHOTO FOR LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE R/H PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (CORNER SECTION ONLY) TO SUIT HK HT OR HG SERIES HOLDENS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LAST PHOTO FOR LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE R/H PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (CORNER SECTION ONLY) TO SUIT HK HT OR HG SERIES HOLDENS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LAST PHOTO FOR LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE R/H PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER REAR QUARTER PANEL REPAIR SECTION (CORNER SECTION ONLY) TO SUIT HK HT OR HG SERIES HOLDENS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LAST PHOTO FOR LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE R/H PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS