February 14, 2022 3:00 pm
Published by dean
THIS ITEM IS A RE- MADE LOWER TAILGATE SEAL RETAINING CHANNEL REPAIR SECTION TO SUIT HQ - Z SERIES HOLDEN WAGON (LH SIDE).
THIS IS QUITE AN INVOLVED PART, WITH FINE FOLDS & CURVES. I'VE MATCHED THE SECTION AS BEST AS POSSIBLE. MADE IN 2 PIECES SPOT WELDED TOGETHER. THESE SIDE SPECIFIC 1/2 SECTIONS ARE DESIGNED TO OVERLAP SLIGHTLY IN THE CENTRE OF THE VEHICLE.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE LH (PASSENGER SIDE) PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE LOWER TAILGATE SEAL RETAINING CHANNEL REPAIR SECTION TO SUIT HK HT OR HG SERIES HOLDEN WAGON (RH SIDE).
THIS IS QUITE AN INVOLVED PART, WITH FINE FOLDS & CURVES. I'VE MATCHED THE SECTION AS BEST AS POSSIBLE. MADE IN 2 PIECES SPOT WELDED TOGETHER. THESE SIDE SPECIFIC 1/2 SECTIONS ARE DESIGNED TO OVERLAP SLIGHTLY IN THE CENTRE OF THE VEHICLE.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE RH (DRIVERS SIDE) PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
February 14, 2022 3:02 pm
Published by dean
THIS ITEM IS A RE- MADE LOWER TAILGATE SEAL RETAINING CHANNEL REPAIR SECTION TO SUIT HQ - Z SERIES HOLDEN WAGON (RH SIDE).
THIS IS QUITE AN INVOLVED PART, WITH FINE FOLDS & CURVES. I'VE MATCHED THE SECTION AS BEST AS POSSIBLE. MADE IN 2 PIECES SPOT WELDED TOGETHER. THESE SIDE SPECIFIC 1/2 SECTIONS ARE DESIGNED TO OVERLAP SLIGHTLY IN THE CENTRE OF THE VEHICLE.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE RH (DRIVERS SIDE) PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
July 26, 2019 9:54 pm
Published by dean
THIS ITEM IS A REPAIR PANEL TO SUIT THE REAR TRAY AREA (REAR SIDE) OF THE HK HT & HG SERIES UTE & PANEL VAN.
THIS PART REPLACES THE SUPPORTING EDGE THAT THE TRAY COMPARTMENT FLOOR SITS ON. THIS PART SUITS THE REAR SIDE OF THE WHEEL TUB. SOLD IN 550mm LENGTHS, TO AID IN DELIVERY SIZE, OR TO SUIT INDIVIDUAL REPAIRS. TWO LENGTHS WOULD BE REQUIRED TO REPAIR ONE SIDE OF FLOOR SUPPORT (4 per vehicle). MADE FROM HEAVIER GUAGE 1.2mm STEEL.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA COURIER or TRACKABLE POST.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT ALL HK HT AND HG SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE TRIANGULAR COVER, WHICH FITS ON THE FRONT SIDE OF THE WHEEL TUB.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY, FOR THE L/H (PASSENGER SIDE).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
March 15, 2023 8:02 pm
Published by dean
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT HD AND HR SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE TRIANGULAR COVER, WHICH FITS ON THE FRONT SIDE OF THE WHEEL TUB.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY. FITS BOTH L/H & R/H SIDE.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT ALL HK HT AND HG SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE TRIANGULAR COVER, WHICH FITS ON THE FRONT SIDE OF THE WHEEL TUB.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY, FOR THE R/H (DRIVER SIDE).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT ALL HK HT AND HG SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE LARGE REAR COVER, WHICH FITS TO THR REAR SIDE OF THE WHEEL TUB.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY, FOR THE L/H (PASSENGER SIDE).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
September 10, 2024 1:08 pm
Published by dean
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT HD AND HR SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE LONG REAR COVER, WHICH FITS ON THE SIDE ABOVE THE RH (DRIVER’S SIDE) WHEEL TUB.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY, FOR THE R/H (DRIVER SIDE).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT ALL HK HT AND HG SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE LONG REAR COVER, WHICH FITS ON THE SIDE ABOVE THE WHEEL TUB.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY, FOR THE R/H (DRIVER SIDE).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
September 10, 2024 1:22 pm
Published by dean
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT ALL HD & HR SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE LONG REAR COVER, WHICH FITS ON THE SIDE ABOVE THE LH (PASSENGER SIDE) WHEEL TUB.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY, FOR THE L/H (PASSENGER SIDE).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT ALL HK HT AND HG SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE LONG REAR COVER, WHICH FITS ON THE SIDE ABOVE THE WHEEL TUB.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY, FOR THE L/H (PASSENGER SIDE).
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
May 11, 2022 2:22 pm
Published by dean
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT HD AND HR SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE SMALL CURVED REAR COVER TO ACCESS THE TAIL LIGHT AREA, AND FITS EITHER SIDE OF THE VEHICLE.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A TRAY INSPECTION COVER PLATE TO SUIT ALL HK HT AND HG SERIES HOLDEN UTE AND PANEL VAN.
THIS IS THE SMALL REAR COVER TO ACCESS THE TAIL LIGHT AREA, AND FITS EITHER SIDE OF THE VEHICLE.
THIS ITEM IS A GREAT PIECE TO REPLACE NOW COMMONLY MISSING OR DAMAGED PART.
THESE PARTS ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE, AND MADE OFF AN ORIGINAL PART FOR ACCURACY.
THESE PANELS ARE MADE FROM 1mm STEEL AS ORIGINAL AND COME IN A CLEAR RUST PREVENTATIVE COATING FOR DELIVERY.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A UNIVERSAL STYLE FLOOR PAN RUST REPAIR PANEL.
THESE PANELS ARE MADE FROM 1mm COLD ROLLED PANEL STEEL. THEY ARE APPROXIMATELY 500mm LONG x 400mm WIDE, WITH THREE SWAGE LINES SPACED 100mm APART, PRESSED TO GIVE A FACTORY APPEARANCE AND ADD REINFORCEMENT (SEE PICS).
THESE WOULD SUIT PEOPLE WHO REQUIRE A SOLID RUST REPAIR WITHOUT THE NEED FOR A GENUINE PART.
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
