November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A REMADE FLOOR SHIFTER MOUNT PANEL TO SUIT ALL HK HT & HG HOLDENS FACTORY FITTED WITH A FLOOR SHIFT OPTION, 4 SPEED MANUAL OR AUTOMATIC.
A THAT I’VE BEEN MAKING FOR MANY YEARS. THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THESE ITEMS ARE A PAIR OF 2 FRONT SEAT BRACKETS TO SUIT HK HT OR HG SERIES HOLDENS WITH FACTORY FITTED BUCKET SEATS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, AND MADE TO RESEMBLE THE ORIGINAL PART WITH "PINCHED" SIDES AND USING SAME AS ORIGINAL BOLT THREAD SIZE.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PAIR ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
October 20, 2023 10:24 am
Published by dean
THIS ITEM IS A FRONT SEAT OUTER MOUNTING PANEL TO SUIT ALL HK HT OR HG SERIES HOLDENS.
THESE PANELS ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, AND MADE TO RESEMBLE THE ORIGINAL PART. THEY ARE READY TO WRLD ON, INCLUDING THE SAME AS ORIGINAL BOLT THREAD SIZE, AND INTERNAL CRUSH PLATE.
THESE PANELS ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PAIR ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:11 am
Published by ntechmedia
THESE ITEMS ARE A PAIR OF (2 pieces)FRONT SEAT INNER MOUNTING BRACKETS TO SUIT HD OR HR SERIES HOLDENS WITH FACTORY FITTED BUCKET SEATS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, AND MADE TO RESEMBLE THE ORIGINAL PART WITH "PINCHED" SIDES AND USING SAME AS ORIGINAL BOLT THREADS
THEY COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE ALLOW MANUFACTURING TIME BEFORE SENDING OFF. EVERY EFFORT IS MADE TO SEND ASAP!!
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS.
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A BONNET SEAL RETAINER TO SUIT THE FRONT COWL CENTRE AREA ON ALL HK HT & HG SERIES HOLDENS. THIS PART SCREWS ONTO THE CENTRE OF THE COWL AS PICTUTRED.
A COMMONLY RUSTED OR MISSING PART NOW.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:10 am
Published by ntechmedia
DESCRIPTION
THIS ITEM IS A RUST REPAIR PANEL SECTION TO SUIT THE FRONT COWL CENTRE AREA (UNDER BONNET SEAL) ON ALL HK HT & HG SERIES HOLDENS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 30, 2021 9:53 am
Published by dean
THIS ITEM IS A NEW REPRODUCTION BATTERY TRAY SUPPORT BRACKET PANEL TO SUIT ALL HK HT & HG SERIES HOLDENS.
THESE ARE HAND FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:10 am
Published by ntechmedia
THIS ITEM IS A RE- MADE FRONT SUBFRAME CROSSMEMBER MOUNTING PANEL TO SUIT ALL HK HT & HG SERIES HOLDENS.
THIS PANEL IS MADE TO FIT UNDER THE FRONT SUBFRAME RAIL, & HAS A PRESSED CENTRE HOLE FOR THE CROSSMEMBER BOLT ALIGNMENT, AS ORIGINAL.
THESE ARE HAND FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENSIONS, ACCURACY AND TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. I MAKE THESE FROM 1.2mm ZINC ANNEALED STEEL TO HELP PREVENT RUST.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY. UNIVERSAL TO FIT R/H & L/H SIDES.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE CRUSH TUBE FOR THE FRONT SUBFRAME RAIL, TO SUIT ALL HK HT & HG SERIES HOLDENS.
THIS FITS INSIDE THE FRONT SUBFRAME RAIL, BETWEEN THE UPPER & LOWER CENTRE HOLES FOR THE MAIN CROSSMEMBER BOLT AS ORIGINAL.
THESE ARE MADE USING ORIGINAL PARTS AS A SAMPLE FOR DIMENSIONS, ACCURACY AND TO RESEMBLE THE ORIGINAL PART AS MUCH AS POSSIBLE. THESE TUBES ARE MADE FROM 3mm MATERIAL, THE ORIGINALS WERE APPROXIMATELY 2mm.
PLEAS SEE PHOTOS FOR REFERENCE & LOCATION.
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PIECE ONLY. UNIVERSAL TO FIT R/H & L/H SIDES.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
November 21, 2018 10:10 am
Published by ntechmedia
Deano's -THE ORIGINAL MAUFACTURER OF THE HQ - WB heater blank off plate.
THIS ITEM IS A HEATER BLANK OFF PLATE TO SUIT HQ THROUGH TO WB SERIES HOLDENS (WITHOUT FACTORY AIR CONDITIONING).
THESE PLATES ARE MADE OUT OF 1mm PANEL STEEL, & WITH SEVERAL SWAGE LINES AROUND THE EDGE, TO GIVE A FACTORY APPEARANCE, ADD REINFORCEMENT AND AID IN SEALING (SEE PICS).
THESE PANELS WERE NOT A FACTORY FITTED PART, THEY ARE MADE TO SUIT PEOPLE THAT WANT TO REMOVE THEIR HEATER BOX (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
August 2, 2021 10:51 am
Published by dean
THIS ITEM IS A BLANKING PLATE / INSPECTION COVER COVER (single - 1 piece only) TO SUIT UNIVERSAL APPLICATIONS. THESE ARE AVAILABLE MADE TO ORDER FROM BETWEEN 150mm - 250mm DIAMETERS, WITHOUT MOUNTING HOLES. PLEASE SPECIFY YOR REQUIRED SIZE WHEN PLACING AN ORDER.
THESE PANELS WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR 1 single panel ONLY.
August 2, 2021 10:37 am
Published by dean
Deano's -THE ORIGINAL MAUFACTURER OF THE HQ - WB heater blank off plate, See photos for correct design of turned upwards swaged edge, as per other factory Holden cover plates. This stops rubbing against paint, and aids in proper seal.
THIS ITEM IS AN UNDER DASH HEATER DUCT DELETE PLATE TO SUIT HQ to WB series HOLDENS (These fit under the dash- as pictured). APPROXIMATELY 200mm in total diameter. May not suit cars with factory fitted air conditioning. THESE ARE SOLD SINGULARLY WITHOUT MOUNTING HOLES.
THESE PLATES ARE MADE FROM PANEL STEEL, WITH SEVERAL SWAGE LINES AROUND THE EDGE, TO GIVE A FACTORY APPEARANCE, ADD REINFORCEMENT AND AID IN SEALING (SEE PICS).
THESE PANELS WERE NOT A FACTORY FITTED PART, THEY ARE MADE TO SUIT PEOPLE THAT WANT TO REMOVE THEIR HEATER SYSTEM (SEE PHOTOS FOR REFERENCE & LOCATION).
THESE PANELS WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE panel ONLY.
August 23, 2021 10:40 am
Published by dean
Deano's -THE ORIGINAL MAUFACTURER OF THE HQ - WB heater blank off plate, See photos for correct design of turned upwards swaged edge, as per other factory Holden cover plates. This stops rubbing against paint, and aids in proper seal.
THIS ITEM IS AN UNDER DASH HEATER DUCT DELETE PLATE TO SUIT HQ to WB series HOLDENS (These fit under the dash- as pictured). APPROXIMATELY 210mm in total diameter. May not suit cars with factory fitted air conditioning. THESE ARE SOLD SINGULARLY WITHOUT MOUNTING HOLES.
THESE PLATES ARE MADE FROM PANEL STEEL, WITH SEVERAL SWAGE LINES AROUND THE EDGE, TO GIVE A FACTORY APPEARANCE, ADD REINFORCEMENT AND AID IN SEALING (SEE PICS).
THESE PANELS WERE NOT A FACTORY FITTED PART, THEY ARE MADE TO SUIT PEOPLE THAT WANT TO REMOVE THEIR HEATER SYSTEM (SEE PHOTOS FOR REFERENCE & LOCATION).
THESE PANELS WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR ONE panel ONLY.
October 2, 2020 10:21 am
Published by dean
THESE ITEMS ARE A PAIR OF RE- MADE HEATER BLANK OFF PLATES TO SUIT ALL HK HT AND HG HOLDENS.
THESE PLATES ARE CUSTOM MADE ITEMS, WITHOUT THE USUAL SCREW MOUNTING HOLES FOR A CLEANER LOOK. THE PLATES WILL NEED TO BE BONDED (or similar) TO THE CAR BODY. THESE PLATES COVER THE HOLES WHERE THE HEATER IS USUALLY POSITIONED ON THE FIREWALL (SEE PICS FOR REFERENCE).
THESE PLATES ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE TO SEAT & AID IN SEALING ON THE RAISED LIP OF THE CAR'S FIREWALL, WHICH A FLAT PLATE CANNOT DO (SWAGE DEPTH MAY DIFFER SLIGHTLY TO AN ORIGINAL SET). THESE PARTS ARE MADE OFF AN ORIGINAL SET FOR ACCURACY, SO THEY RESEMBLE THEM WELL. THE LOWER PLATE HAS A FOLDED CREASE LINE, AS THE ORIGINAL, IT GOES TO THE BOTTOM, WHICH FITS THE SHAPE OF THE FIREWALL PROPERLY (NOT TRANSIT DAMAGE!!) PLEASE REFER TO LAST PHOTOS OF AN ORIGINAL FOR EXAMPLE.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THESE PANELS COME DELIVERED AS BARE STEEL, SEALED IN A CLEAR PROTECTIVE COATING TO PREVENT RUST.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION. THE LAST PHOTO IS A REFERENCE TO SHOW LOCATION.
THIS LISTING IS FOR ONE SET ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:11 am
Published by ntechmedia
THESE ITEMS ARE A PAIR OF RE- MADE HEATER BLANK OFF PLATES TO SUIT ALL HK HT AND HG HOLDENS.
THEY SCREW OVER THE HOLES WHERE THE HEATER IS USUALLY POSITIONED ON THE FIREWALL (SEE PICS FOR REFERENCE).
THESE PLATES ARE HAND FORMED WITH THE SWAGE LINES AROUND THE EDGE TO SEAT & AID IN SEALING ON THE RAISED LIP OF THE CAR'S FIREWALL, WHICH A FLAT PLATE CANNOT DO (SWAGE DEPTH MAY DIFFER SLIGHTLY TO AN ORIGINAL SET). THESE PARTS ARE MADE OFF AN ORIGINAL SET FOR ACCURACY, SO THEY RESEMBLE THEM WELL. THE LOWER PLATE HAS A FOLDED CREASE LINE, AS THE ORIGINAL, IT GOES TO THE BOTTOM, WHICH FITS THE SHAPE OF THE FIREWALL PROPERLY (NOT TRANSIT DAMAGE!!) PLEASE REFER TO LAST PHOTOS OF AN ORIGINAL FOR EXAMPLE.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THESE PANELS COME DELIVERED AS BARE STEEL, SEALED IN A CLEAR PROTECTIVE COATING TO PREVENT RUST.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION. THE LAST PHOTO IS A REFERENCE TO SHOW LOCATION.
THIS LISTING IS FOR ONE SET ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
November 21, 2018 10:11 am
Published by ntechmedia
THIS ITEM IS A RE- MADE INNER BEAVER PANEL CENTRE SECTION (REAR BOOT FLOOR EDGE) TO SUIT HK HT OR HG SERIES HOLDEN MONARO & SEDAN BODY STYLES.
THIS PANEL IS MADE TO FIT UP TO, AND JOIN ON MOST FACTORY SEAMS.
THESE ARE FORMED USING ORIGINAL PARTS AS TEMPLATES FOR DIMENTIONS, ACCURACY AND MADE TO RESEMBLE THE ORIGINAL PART AS CLOSE AS POSSIBLE (SEE PHOTOS FOR REFERENCE & LOCATION).
THIS PANEL WOULD COME DELIVERED IN A CLEAR PROTECTIVE COATING.
PLEASE LOOK AT PHOTOS TO SEE IF SUITABLE FOR YOUR APPLICATION.
THIS LISTING IS FOR
ONE PANEL ONLY.
PLEASE NOTE- BECAUSE THESE ARE HAND MADE TO ORDER PANELS, PLEASE READ ALL TERMS & CONDITIONS.
THIS ITEM WOULD BE SENT VIA TRACKABLE POST OR COURIER.
THANKS... DEANO'S AUTO RESTORATIONS
